D Shaped Glass Clamp Satin Polished For Fixing To Square Posts or Walls
Stainless Steel D shaped glass clamp with flat base to be fixed on square posts walls or floors, in a stain [dull polished] finish. A perfect solution for plate glass holders and clips and creating balustrade systems, partitions, railings, windbreaks, displays and sneeze guards. No holes are required in the glass but optional pins supplied. Suitable for internal and external glass use.
Available in two types of stainless steel:
- 304 Indoor Grade Stainless Steel in a Satin Finish – Download Drawings Here
- 316 Outdoor Grade Stainless Steel in a Satin Finish – Download Drawings Here
Available in size 63mm x 45mm
Suitable for toughened (tempered) glass panels in thicknesses of 6 , 8, 10 & 12mm
The D Shaped Glass Clamp consists of:
- 1 x Secure Pin
- 2 x Rubber Gaskets
- 2 x glass side plate securing screws/ Mounting shape:
Recommended positions for fixing d shaped glass clamps:
150mm max from floor to the centre of the Glass Clamp, or 75mm from the bottom of the glass to the centre of the Glass Clamp.
75mm from the top of the glass to the centre of the Glass Clamp.
The secure pin can be removed if using with glass with no holes drilled. If using holes to secure the glass the holes need to be as follows:
12mm wide holes required
Holes need to be located 26.5mm from the edge of the glass
Glass will need to be 20mm from wall or post
Download Here for more details regards installation / assembly