When considering adding a decking area to your garden it is useful to understand the composite decking advantages compared to traditional timber materials.

To keep a timber decking up to scratch you will have to be prepared to pressure wash, stain, paint, seal and sand your deck every year or two. Timber decking tends to trap moisture and will twist, splinter and warp if not maintained properly. Depending on the size of the deck it could take long laborious hours maintaining it rather than enjoying what is was originally intended for.

The amount of maintenance required for composite decking isn’t near the level of a timber: no sanding, painting or staining required. For most types of composites only a bucket a soapy water and a brush is all that’s required.

This is one of the many reasons why so many people opt for a wood-alternative decking like ECODECKING.




Mould: mould needs moisture and temperatures between 0 and about 30 degrees.ECODECKING is not a food source for old, but can collect food in the form of pollens, dirt and debris from overflow of pot plants and gutters. If the gaps between the deck boards are too small, clogged or non existent, then moisture cannot dry. Use the correct clip to ensure spacing specification. If mould colonies appear, clean the deck with a deck cleaner. Power washing with a water-blaster can damage the boards and does not remove all spores of mould and it will quickly grow back.

Pressure Washer: We do not recommend the use of a very high pressure washer or applied closer than 15cm from the deck surface.

Dirt and debris: clean the deck to remove dirt and debris. Soap, hot water and a soft bristle brush is sufficient.

Mildew and grime: use a non aggressive general purpose deck cleaning product. For best results apply deck cleaner, use a scrubbing brush to loosen mildew and grim, then rinse thoroughly. Many stains can be removed using household cleaners, stubborn stains can be bleached or may require a deck cleaner containing oxalic acid.

Water tannin spots: tannin spots can sometimes be seen on ECODECKING composite decking. It will not bleed like a hardwood timber. Most tannin spots will appear within the first 16 weeks of normal weathering. These will fade or disappear naturally during weathering.

Scuffs, abrasions and rust stains: ECODECKING is designed to retain its fresh look, obviously if furniture etc is dragged over any surface it will leave some kind of marking. The surface maybe revitalised if need be with an Outdure Revitalising Wire Brush. Depending on the surface finish your decking product has, rust stains can be removed by light brushing. Practice your resurfacing technique on a scrap piece of decking before trying to resurface an area in the middle of your deck!

Oil and grease stains: Use household degreasing agent as soon as the stain occurs and scrub, the rinse with hot water. Repeat if necessary, rinse thoroughly.

Berries / wine stains: these stains ca be very stubborn in any material. We suggest you mix bleach into hot water according to the bleach-packaging label. Scrub the stain lightly and rinse thoroughly.

Published: 9th June 2015

Read All Articles